R410A Residential Hot Water Air Source Heat Pump 3.5kW High Efficiency
Hot Water Air Source Heat Pump 3.5kW
,Residential Hot Water Air Source Heat Pump
The R410A Residential Hot Water Heat Pump is designed to provide reliable and efficient domestic hot water for homes, apartments, and villas. Using R410A refrigerant, a rotary compressor, and a high-efficiency tube-in-shell heat exchanger, it delivers stable heating performance with multiple capacity options from 3.5 to 9.6 kW.
The heat pump uses ambient air as a heat source to heat domestic water efficiently. Depending on the model, COP reaches up to 3.96, while the rated outlet water temperature is 55°C and the maximum temperature can reach 60°C.
With hot water production from 75 to 206 L/h, the series can accommodate different residential hot water demands.
A Wilo water pump is integrated into the system and can be directly connected to the water tank. This design simplifies water circulation and installation while reducing the need for additional components.
The high-efficiency tube-in-shell heat exchanger and rotary compressor provide stable heat transfer and reliable operation.
The unit supports heating and cooling functions for flexible operation. A four-way valve enables automatic defrosting, helping maintain stable performance in low-temperature conditions.
The system operates across an ambient temperature range of -7°C to 43°C and features IPX4 protection.
The clear LCD control panel provides convenient operation and system management, including:
- Heating/cooling mode selection
- Hot water temperature setting
- Timing settings
- E-heater control
- Defrost settings
- Parameter checking
- Fault warning and troubleshooting
The R410A heat pump is suitable for homes, apartments, villas, and residential domestic hot water systems. With different capacity options and an integrated water pump, it provides a practical solution for new installations and hot water system upgrades.
OEM/ODM customization, bulk supply, and project support are available for HVAC distributors, installers, contractors, and residential hot water solution providers.
Test condition: Inlet water temperature 15°C, Outlet water temperature 55°C, Dry bulb temperature 20°C, Wet bulb temperature 15°C.
Note: The data above is for reference only, please refer to the nameplate on the unit if for more specific data.
