Fast Response Teflon Heating Mat 150W 4-5mm Wet Zone Warming
Twin Conductor Teflon Heating Mat: 150W/m², 4-5mm thin, 70°C max. Features aluminum foil shielding, 300g/m² fiberglass mesh with double-sided tape for easy installation. Ideal for underfloor heating in homes and commercial spaces. OEM and custom specifications available for bulk supply.
Fast Warm Up Teflon Mat
,Wet Zone Radiant Mat
,Cold Climate Floor Warming
Built for fast thermal transfer directly beneath tile and stone finishes, our Twin-Conductor Teflon Heating Mat pairs a high-output fluoropolymer heating core with a lay-flat fiberglass grid. Engineered to eliminate cold floor shock in harsh winters and high-humidity spaces, it delivers immediate, zoned radiant heat without the inertia lag of thick concrete slabs or the freeze risks of water-filled pipes.
Traditional hydronic systems buried deep in concrete screeds take hours to heat up and cool down. Positioned directly inside the thin-set adhesive layer, our mat puts heat right at the floor surface:
- Rapid Surface Heat-Up: Warms porcelain and natural stone tiles quickly, making timed morning and evening heating schedules genuinely effective.
- No Boiler or Pump Parasitic Loss: Converts 100% of electrical input into usable floor-level radiant heat with zero piping distribution losses.
- Freeze-Proof Reliability: Solid-state electric core contains no water, valves, or expansion tanks—eliminating burst-pipe liabilities in seasonal holiday homes, cabins, and unheated commercial spaces.
Upgraded from standard PVC cables to high-grade fluoropolymer (PTFE/FEP) insulation to handle higher wattage densities and continuous thermal cycling:
- 200 °C+ Thermal Endurance: Maintains full dielectric integrity even in high-output 200 W/m² configurations used in conservatories, mudrooms, and poorly insulated subfloors.
- Moisture & Chemical Inertness: Impervious to continuous dampness, condensation, and high-alkaline tile mortars in walk-in showers, locker rooms, and spa facilities.
- Ultra-Slim ~3.5 mm Profile: High dielectric strength permits a compact cable diameter that embeds cleanly into standard mortar without raising doorway thresholds.
Engineered to streamline electrical rough-in and satisfy strict residential and commercial safety codes:
- Single Cold-Lead Entry: Both supply and return conductors are housed within a single cable, requiring only one connection point at the wall thermostat—cutting conduit routing labor in half.
- Full 360° Grounding Braid: Continuous metallic earth shield provides mechanical crush protection during installation and instant fault interruption via RCD/GFCI breakers.
- EMF-Neutralized Core: Parallel opposing currents cancel out electromagnetic fields, making the mat safe for continuous operation in bedrooms, nurseries, and living rooms.
- Pre-Spaced Fiberglass Grid: Factory-secured cable loops guarantee uniform wattage density across the floor, preventing cold stripes or accidental cable crossing.
- Easy Contouring: Cut the fiberglass mesh (leaving the Teflon cable intact) to pivot around floor drains, toilets, kitchen islands, and angled walls.
- Broad Substrate Compatibility: Installs directly over concrete slabs, cement backer boards, thermal insulation boards, or existing ceramic tiles in no-demolition remodels.
Structured for heating wholesalers, flooring distributors, and M&E contractors seeking clean SKU management:
- Three Output Tiers: 100 W/m² (wood/laminate & passive builds), 150 W/m² (standard residential tile & living zones), and 200 W/m² (bathrooms, sunrooms & cold-climate entries).
- Universal Voltage Options: 110V–120V or 220V–240V, 50/60 Hz.
- Modular 0.5 m Roll Widths: Pre-terminated rolls (1 m² to 15 m²+) combine easily to cover any room geometry without custom factory lead times.
- Supply Formats: Bulk contractor rolls or retail-ready kits (heating mat, NTC floor sensor, sensor conduit, and programmable/Wi-Fi thermostat) with full private-label OEM/ODM support.
Contact our technical sales team for heat-loss sizing guides, resistance charts, and wholesale pricing.
| No. | Voltage (V) | Power (W) | Resistance (Ω) | Width (m) | Length (m) | Heating Area (m²) |
|---|---|---|---|---|---|---|
| ATV1500075C | 230 | 75 | 705.30 | 0.50 | 1 | 0.50 |
| ATV1500150C | 230 | 150 | 352.70 | 0.50 | 2 | 1.00 |
| ATV1500225C | 230 | 225 | 235.10 | 0.50 | 3 | 1.50 |
| ATV1500300C | 230 | 300 | 176.30 | 0.50 | 4 | 2.00 |
| ATV1500375C | 230 | 375 | 141.10 | 0.50 | 5 | 2.50 |
| ATV1500450C | 230 | 450 | 117.60 | 0.50 | 6 | 3.00 |
| ATV1500525C | 230 | 525 | 100.80 | 0.50 | 7 | 3.50 |
| ATV1500600C | 230 | 600 | 88.20 | 0.50 | 8 | 4.00 |
| ATV1500675C | 230 | 675 | 78.40 | 0.50 | 9 | 4.50 |
| ATV1500750C | 230 | 750 | 70.50 | 0.50 | 10 | 5.00 |
| ATV1500825C | 230 | 825 | 64.10 | 0.50 | 11 | 5.50 |
| ATV1500900C | 230 | 900 | 58.80 | 0.50 | 12 | 6.00 |
| ATV1500975C | 230 | 975 | 54.30 | 0.50 | 13 | 6.50 |
| ATV1501050C | 230 | 1,050 | 50.40 | 0.50 | 14 | 7.00 |
| ATV1501125C | 230 | 1,125 | 47.00 | 0.50 | 15 | 7.50 |
| ATV1501200C | 230 | 1,200 | 44.10 | 0.50 | 16 | 8.00 |
| ATV1501275C | 230 | 1,275 | 41.50 | 0.50 | 17 | 8.50 |
| ATV1501350C | 230 | 1,350 | 39.20 | 0.50 | 18 | 9.00 |
| ATV1501425C | 230 | 1,425 | 37.10 | 0.50 | 19 | 9.50 |
| ATV1501500C | 230 | 1,500 | 35.30 | 0.50 | 20 | 10.00 |
| ATV1501575C | 230 | 1,575 | 33.60 | 0.50 | 21 | 10.50 |
| ATV1501650C | 230 | 1,650 | 32.10 | 0.50 | 22 | 11.00 |
| ATV1501725C | 230 | 1,725 | 30.70 | 0.50 | 23 | 11.50 |
| ATV1501800C | 230 | 1,800 | 29.40 | 0.50 | 24 | 12.00 |
Custom wattages, voltages, and mat dimensions are available upon request. Contact our engineering team for resistance charts and technical datasheets.
Contact our sales engineering team for technical datasheets, resistance charts, and volume pricing.