Structural Bond Teflon Underfloor Heating Mat 150W 4-5mm Tile Warming
Twin Conductor Teflon Heating Mat: 150W/m², 4-5mm thin, 70°C max. Features aluminum foil shielding, 300g/m² fiberglass mesh with double-sided tape for easy installation. Ideal for underfloor heating in homes and commercial spaces. OEM and custom specifications available for bulk supply.
Structural Bond Teflon Mat
,4-5mm Mortar Embedded Mat
,Tile Stone Bond Warming
Engineered specifically for thin-bed mortar and self-leveling floor assemblies, our Twin-Conductor Teflon Heating Mat combines a high-tensile fluoropolymer heating cable with an open-weave fiberglass grid. It delivers rapid, uniform floor warming while maintaining full structural bond strength between the subfloor and the finished tile or stone.
On active construction and remodel sites, heating cables are exposed to trowel scraping, foot traffic, and high-alkaline cement curing before the tile is ever laid. Our Teflon construction eliminates jobsite vulnerability:
- High Mechanical Crush & Abrasion Resistance: Tough fluoropolymer (PTFE/FEP) primary insulation and heavy-duty outer jacket withstand accidental trowel nicks and foot traffic during tile setting.
- 200 °C+ Continuous Thermal Rating: Prevents thermal degradation even under thick natural stone, heavy bathmats, or low-airflow vanity toe-kicks.
- Open-Weave Mortar Pass-Through: The wide-aperture fiberglass mesh allows thin-set adhesive to flow freely through the grid, ensuring a 100% solid bond between subfloor and tile—preventing hollow spots or cracked grout lines.
Designed to pass electrical inspections on the first visit and minimize wall-chasing labor:
- Single Cold-Lead Termination: Twin-conductor internal geometry eliminates the need to loop the cable back to the wall box—only one power lead enters the thermostat conduit.
- 360° Grounded Metallic Screen: Continuous tinned-copper/aluminum earth braid provides complete fault-current protection for wet-room compliance (bathrooms, walk-in showers, and spa areas).
- EMF-Cancelled Operation: Parallel opposing currents within the twin-core cable neutralize electromagnetic emissions for bedrooms, living areas, and commercial spaces.
- Factory-Calibrated Spacing: Pre-fixed cable loops maintain exact center-to-center spacing across the entire roll, guaranteeing even heat distribution without cold zones.
- Cut-and-Pivot Grid: Installers can snip the fiberglass backing mesh (without touching the heating wire) to turn 90°, reverse direction, or contour around floor drains and toilets in seconds.
- Low-Profile ~3.5 mm – 4.0 mm Build: Sits cleanly inside standard tile adhesive or leveling compound without raising finished floor thresholds.
- Bathroom & Wet-Area Remodels: Eliminates cold tile shock and speeds up floor evaporation after shower use.
- Kitchens, Entryways & Sunrooms: Converts high-traffic ceramic, porcelain, and slate floors into comfortable radiant heat zones.
- Multi-Unit Residential & Hotels: Provides independent, thermostat-controlled room heating with zero boilers, pumps, or water leakage liabilities.
Engineered for electrical wholesalers, tile distributors, and HVAC project suppliers:
- Standard Heat Densities: 100 W/m² (engineered wood/laminate & low-loss builds), 150 W/m² (standard tile & residential rooms), 200 W/m² (bathrooms, conservatories & high heat-loss substrates).
- Electrical Ratings: 110V–120V or 220V–240V, 50/60 Hz.
- Roll Dimensions: 0.5 m standard width across pre-terminated lengths (1 m² to 15 m²+ per mat).
- Supply & OEM Options: Supplied as bulk contractor rolls or private-label retail kits (including heating mat, NTC floor sensor, flexible sensor conduit, and programmable/Wi-Fi thermostat).
Contact our technical team for resistance tables, layout guidelines, and distributor pricing.
| No. | Voltage (V) | Power (W) | Resistance (Ω) | Width (m) | Length (m) | Heating Area (m²) |
|---|---|---|---|---|---|---|
| ATV1500075C | 230 | 75 | 705.30 | 0.50 | 1 | 0.50 |
| ATV1500150C | 230 | 150 | 352.70 | 0.50 | 2 | 1.00 |
| ATV1500225C | 230 | 225 | 235.10 | 0.50 | 3 | 1.50 |
| ATV1500300C | 230 | 300 | 176.30 | 0.50 | 4 | 2.00 |
| ATV1500375C | 230 | 375 | 141.10 | 0.50 | 5 | 2.50 |
| ATV1500450C | 230 | 450 | 117.60 | 0.50 | 6 | 3.00 |
| ATV1500525C | 230 | 525 | 100.80 | 0.50 | 7 | 3.50 |
| ATV1500600C | 230 | 600 | 88.20 | 0.50 | 8 | 4.00 |
| ATV1500675C | 230 | 675 | 78.40 | 0.50 | 9 | 4.50 |
| ATV1500750C | 230 | 750 | 70.50 | 0.50 | 10 | 5.00 |
| ATV1500825C | 230 | 825 | 64.10 | 0.50 | 11 | 5.50 |
| ATV1500900C | 230 | 900 | 58.80 | 0.50 | 12 | 6.00 |
| ATV1500975C | 230 | 975 | 54.30 | 0.50 | 13 | 6.50 |
| ATV1501050C | 230 | 1,050 | 50.40 | 0.50 | 14 | 7.00 |
| ATV1501125C | 230 | 1,125 | 47.00 | 0.50 | 15 | 7.50 |
| ATV1501200C | 230 | 1,200 | 44.10 | 0.50 | 16 | 8.00 |
| ATV1501275C | 230 | 1,275 | 41.50 | 0.50 | 17 | 8.50 |
| ATV1501350C | 230 | 1,350 | 39.20 | 0.50 | 18 | 9.00 |
| ATV1501425C | 230 | 1,425 | 37.10 | 0.50 | 19 | 9.50 |
| ATV1501500C | 230 | 1,500 | 35.30 | 0.50 | 20 | 10.00 |
| ATV1501575C | 230 | 1,575 | 33.60 | 0.50 | 21 | 10.50 |
| ATV1501650C | 230 | 1,650 | 32.10 | 0.50 | 22 | 11.00 |
| ATV1501725C | 230 | 1,725 | 30.70 | 0.50 | 23 | 11.50 |
| ATV1501800C | 230 | 1,800 | 29.40 | 0.50 | 24 | 12.00 |
Custom wattages, voltages, and mat dimensions are available upon request. Contact our engineering team for resistance charts and technical datasheets.
Contact our sales engineering team for technical datasheets, resistance charts, and volume pricing.