What is an air source heat pump?

October 27, 2026
Latest company blog about What is an air source heat pump?

An air source heat pump absorbs heat from the outside air and uses it to increase the temperature inside your home. 

Air source heat pumps look similar to air-conditioning units. Their size depends on how much heat they'll need to generate for your home. The more heat, the bigger the heat pump.

There are two main types of air source heat pumps: air-to-water and air-to-air. They work in different ways and are compatible with different types of heating systems. 


Air-to-water heat pumps

Air-to-water heat pumps (also known as hydronic heat pumps) take heat from the outside air and feed it into your wet central heating system. This type of heat pump can be a direct replacement for your gas or oil boiler.

They're particularly well suited to homes with larger radiators or wet underfloor heating because the heat they produce is cooler than that from a conventional gas or oil boiler. To be most effective, they need a large surface area to release the heat. 

It's important to note that modern heat pump installations don't always require these kinds of home improvement upgrades. You could choose a bigger heat pump and run it at higher temperatures instead. It'll be up to you and your installer to decide what to prioritise upfront, and what the ongoing costs and savings will look like over time. It's worth talking through the various options for your home with a professional so that you can make an informed choice.

If you currently have a wet central heating system, an air-to-water heat pump will be easier to fit into your existing set-up than other types. They are more expensive than air-to-air heat pumps, but you can get a government grant (the Boiler Upgrade Scheme) for £7,500 towards your costs, subject to eligibility. If your home is off the gas grid and currently uses oil or LPG heating, the grant is increased to £9,000.


Air-to-air heat pumps


Air-to-air heat pumps take heat from the outside air and feed it into your home through fans. This type of heat pump is not a direct replacement for a gas or oil boiler, as it doesn't heat radiators. It is an alternative to other types of electric heating (storage heaters or panel heaters), and could be a good choice for flats where an air-to-water system is not feasible or where you are hoping to heat (and cool) a small space.

You generally need a separate emitter (fan unit) for each room that requires direct heat, and up to five of these can be connected to a single outdoor compressor unit. You may not need them in every single room, depending on your home's layout. 

You may also consider a warm-air circulation system, which moves the heat around your home through ducts. This is expensive and disruptive to retrofit, and best considered for a new-build property.

Air-to-air systems cannot produce hot water, so you'll need a separate immersion heater or other water-heating system.

In the summer, an air-to-air heat pump can operate in reverse. In other words, you can use it as an air-conditioning unit to provide cool air for your home.

Air-to-air heat pumps are cheaper to install than air-to-water ones, but if you are replacing a wet central heating system (radiators and pipes) it will cost extra to have this removed. 

An air-to-air heat pump system may now be eligible for a grant of £2,500, as part of the Government's Boiler Upgrade Scheme, if it replaces a fossil-fuel heating system or direct electric heating. 

Previous Post
Next Post